Filter
Top Products
Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1
180
6.4.3 Set or modify the vpnclient parameters
modify command The ipsec peer vpnclient modify command sets or modifies the
vpnclient entity parameters.
Example In this example, the parameters of the previously defined vpnclient entity , named
client1, are set:
Use the
list command to verify the results of the operation:
[ipsec peer vpnclient]=>modify
name = client1
[xauthuser] = user1
[xauthpass] = *****
Please retype xauthpass for verification.
[xauthpass] = *****
[clienttype] =
generic cisco nortel
[clienttype] = generic
[virtualip_maptype] =
none nat dhcp
[virtualip_maptype] = none
[lan_range] = 10.60.11.0/24
:ipsec peer vpnclient modify name=client1 xauthuser=user1 xauthpass=_DE
V_4FDCAAB92D454D3A clienttype=generic virtualip_maptype=none lan_range=
10.60.11.0/24
[ipsec peer vpnclient]=>
[ipsec peer vpnclient]=>list
[client1]
Xauth : user1 : ********
Client Type : generic
Virtual IP Map Mode : none
Local LAN IP Range : 10.60.11.0/24
[ipsec peer vpnclient]=>