Filter
Top Products
Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1
146
4.7.3 Create a New Connection
add command A new Connection is created with the ipsec connection add command.
Example In the following example, a new connection is created, named connect1
The result of this operation can be verified with the
list command.
For the newly created connection in this example, all parameters are unset. Setting
of the parameters is described in the next section.
[ipsec]=>connection
[ipsec connection]=>add
name = connect1
:IPSec connection add name=connect1
[ipsec connection]=>
[ipsec connection]=>list
[connect1]
Peer : <unset>
Local network : <unset>
Remote network : <unset>
Always on : disabled
Descriptors :
Options : <unset>
State : disabled
[ipsec connection]=>