Filter
Top Products
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
97
Parameter table The following table summarizes the parameters comprised in the connection
security descriptor:
Connection Descriptor
name
Internal symbolic name to identify the Connection Descriptor.
Crypto The table below shows the cryptographic functions supported by the SpeedTouch™
along with their corresponding key size:
DES is relatively slow and is the weakest of the algorithms, but it is the
industry standard.
3DES is a stronger version of DES, but is the slowest of the supported
algorithms (for a comparable key length).
AES is the new encryption standard selected by the American government to
replace DES/3DES. It is recommended to use AES since it is the most
advanced of the supported encryption methods.
NULL encryption: The message is not encrypted. Selecting NULL encryption
achieves authentication without encryption, being equivalent to the use of the
Authentication Header (AH) that is no longer supported from Release R5.3.0
onwards.
In addition, NULL encryption may be useful for testing purposes since the
messages on the communication link can be interpreted. Message
authentication remains active.
Parameter Description
Descriptor name Symbolic name to identify the Descriptor.
Crypto
Cryptographic function to be used for the IPSec Security
Association.
Integrity Hashing function used for message authentication.
Encapsulation Selects the ESP encapsulation mode.
PFS Selects the use of Perfect Forward Secrecy
Lifetime-secs
The lifetime of the IPSec Security Association. At
expiration of this period re-keying occurs.
Lifetime-kbytes
The maximum data volume transported before re-keying
occurs.
Algorithm Valid key lengths (bits)
DES 56
3DES 168
AES 128, 192, 256
NULL -