Filter
Top Products
Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1
181
6.4.4 Attach the vpnclient entity to the peer entity
modify the peer
parameters
The :ipsec peer modify name=peer1 client/server=client1
command attaches the previously defined vpnclient entity to the corresponding
peer.
Example In this example vpnclient1 is attached to peer1:
The result is shown when listing the peer entities:
[ipsec peer]=>modify
name = peer1
[remoteaddr] = 20.50.10.2
[backupaddr] =
[exchmode] = main
[localid] = (addr)20.60.10.2
[remoteid] = (addr)20.50.10.2
[phyif] = DIALUP_PPPOE
[descr] = AES_MD5
[auth] = secret1
[client/server] = client1
[options] =
:ipsec peer modify name=peer1 client/server=client1
[ipsec peer]=>
[ipsec peer]=>list
[peer1]
Remote Address : 20.50.10.2
Backup Remote Address: <unset>
Physical IF : DIALUP_PPPOE
Exchange Mode : main
Local Identifier : (addr)20.60.10.2
Remote Identifier : (addr)20.50.10.2
Descriptors : AES_MD5
Authentication : secret1
Client/Server : VPN Client Descriptor: client1
Options : <unset>
[ipsec peer]=>