Filter
Top Products
346 TM 3.1 OA and M using TM 3.1 applications
•
Use the Set Node Time to change the time and date on the node. The
node time is updated every minute while the Card Properties is open.
•
Use the Open log file, Open trace file, and the Open OM file buttons
to view the related files. These files are transferred from the card using
FTP and displayed in Microsoft WordPad on the PC.
• The trace file is for expert level debugging (trace must be turned on
through the command line).
•
The log file contains error messages.
•
The OM file contains the current Operational Measurements.
•
Setting the node time is required dur ing initial node installation. TM 3.1
sets the Leader card’s time. The Leader sets the time on all other cards.
Configure date and time for the IP Trunk 3.01 (and later) node
Configure the date and time on the IP Trunk 3.01 (and later) node in order
to have correct time and date stamps in Operational Measurement (OM)
reports, RADIUS Call Accounting reports, error messages and error and
trace logs.
Follow the steps in Procedure 54 "Configure the date and time" (page 346)
to configure the date and time.
Procedure 54
Configure the date and time
Step Action
1 Select the IP Trunk 3.01 (and later) node for which the time and date
is to be configured from the list in the upper part of the window.
2
Double-click Leader 0 from the list in the lower part of the window.
The ITG Card Properties Maintenance tab appears.
3
Click the Set Node Time button. The Set Node Time dialog box
appears.
4
Set the correct date and time.
5
Click OK. The clock is updated immediately on the Active Leader
card (Leader 0 or Leader 1), which in turn updates the other cards in
the ITG ISL Trunk node.
—End—
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.