Filter
Top Products
System level maintenance 395
IP trunk card LD commands
System level maintenance of the IP trunk card is performed using LD 32 or
LD 36. See Table 56 "Supported LD 32 commands" (page 395) and Table
57 "Supported LD 36 commands" (page 395).
Table 56
Supported LD 32 commands
Command
Function
DISC l s c
Disable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
DISI l s c
Disable the indicated IP trunk card when idle, where:
l = loop, s = shelf, and c = card.
DISU l s c u
Disable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
ENLC l s c
Enable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
ENLU l s c u
Enable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
IDC l s c
Print the Card ID information for the specific IP trunk
card, where:
l = loop, s = shelf, and c = card.
STAT l s c
Print the system software status of the indicated IP
trunk card, where:
l = loop, s = shelf, and c = card.
STAT l s c u
Print the system software status of the indicated unit,
where:
l = loop, s = shelf, c = card, and u = unit.
For Meridian 1 PBX 11C Cabinet, Meridian 1 PBX 11C Chassis, CS 1000M Cabinet, and CS
1000M Chassis, the TN address < l s c > should be replaced by < s c > and the < l s c u > address
replaced by < s c u >.
Table 57
Supported LD 36 commands
Command
Function
DISC l s c
Disable the indicated IP trunk card, where:
l = loop, s = shelf, and c = card.
DISU l s c u
Disable the indicated unit, where:
l = loop, s = shelf, c = card, and u = unit.
For Meridian 1 PBX 11C Cabinet, Meridian 1 PBX 11C Chassis, CS 1000M Cabinet, and CS
1000M Chassis, the TN address < l s c > should be replaced by < s c > and the < l s c u > address
replaced by < s c u >.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.