Filter
Top Products
System commands LD 32 385
Enable an indicated IP trunk card port
To enable an indicated IP trunk card port in LD 32, use the following
command:
ENLU l s c u
Enable the indicated IP Trunk 3.01
(and later) unit (port), where:
l = loop, s = shelf, c = card
Display IP trunk card ID information
To display the IP trunk card ID in LD 32, use the following command:
IDC l s c
Display the card ID for the card,
where:
l = loop, s = shelf,
c = card
Display IP trunk card status
To display the status of an indicated IP trunk card in LD 32, use the following
command:
STAT l s c
Display the status of the indicated
IP trunk card, where:
l = loop, s = shelf, c = card
Display IP trunk card port status
To display the status of a port on the IP trunk card in LD 32, use the
following command:
STAT l s c u
Display the status of the indicated
IP Trunk 3.01 (and later) port, where:
l = loop, s = shelf, c = card, u = unit.
Nortel Communication Server 1000
IP Trunk Fundamentals
NN43001-563 01.01 Standard
Release 5.0 30 May 2007
Copyright © 2007, Nortel Networks
.