Filter
Top Products
Installing and Maintaining the Versalar Switch Router 15000
2-6
308684-B Rev 00
Figure 2-2. SC Duplex to SC Duplex Cable
Hardware for Mounting the Versalar 15000 in an Equipment Rack
To install the Versalar 15000 in an equipment rack, you need a Phillips
screwdriver and a rack that meets the following specifications:
• Heavy-duty steel construction
• Electronic Industries Association (EIA) standard hole-spacing
• Four-post rack with width of 19 in. (48.26 cm) and depth of 24 in. (60.96 cm)
• Four-post rack with width of 23 in. (58.42 cm) and depth of 24 in. (60.96 cm)
• Two-post rack with width of 19 in. (48.26 cm)
If the rack does not have threaded rail holes, you must use the supplied cagenuts
(see Figure 2-1
) with the cagenut screws.
9 ft
(2.7 m)
CAB0035
A