Filter
Top Products
60 Chapter 9 Upgrading CallPilot Mini/CallPilot 150
P0990474 03
7 Wait until the LED turns on.
8 Unplug the power connector from the CallPilot Mini/CallPilot 150.
9 Press the eject button on the top PCMCIA slot to remove the upgrade cartridge.
10 Restore power to the CallPilot Mini/CallPilot 150.
The CallPilot Mini/CallPilot 150 will reboot. At this point it begins any necessary conversions.
11 If necessary, you can restore your CallPilot information. For information about how to restore
the CallPilot information, refer to “Restoring the CallPilot information” on page 55.
Upgrading the message storage
Message storage is the amount of memory available on your CallPilot system to store greetings
and voice mail messages. You can upgrade the message storage on your CallPilot Mini/
CallPilot 150 from 24 hours to 60 hours.
To upgrade the message storage, you replace the existing feature cartridge with the expanded
memory feature cartridge. Contact your Nortel Networks sales representative for information on
how to obtain an expanded memory feature cartridge.
To upgrade the message storage:
1 Backup your CallPilot information. For information about how to backup CallPilot, refer to
“Backing up the CallPilot information” on page 53.
2 Put on an anti-static strap and connect it to a grounded metal object.
3 Unplug the power connector from the CallPilot Mini/CallPilot 150.
4 Press the eject button on the bottom PCMCIA slot to remove the feature cartridge.
5 Insert the new feature cartridge into the bottom PCMCIA slot.
For the location of the PCMCIA slots, refer to Figure 1 on page 19.
Note: When removing the upgrade cartridge, be careful not to dislodge the feature
cartridge in the bottom slot. If the feature cartridge becomes dislodged, ensure it is
fully inserted before you restore power.