Filter
Top Products
80 Modem Access
P0990474 03
Connecting to the CallPilot system
To connect to the CallPilot system you must:
• configure your modem to access the CallPilot modem
• connect to the CallPilot modem
Configuring your modem to access the CallPilot modem
The CallPilot modem requires a special configuration for access. This requirement helps prevent
unauthorized access to the CallPilot system.
To configure your modem:
1 Open the folder that contains the Nortel Networks Modem Configuration Utility.
(CPsecureModem.exe).
2 Double click CPsecureModem.exe.
The Modem Configuration Utility opens.
3 Select the Configure Modem for Secure Access option.
4 Click the OK button.
The Configuration Complete dialog box appears.
5 Click the OK button.
6 In you are using Windows NT 4.0, restart your computer.
After your computer finishes restarting, the modem is ready to connect to the CallPilot modem.
Connecting to the CallPilot modem
To connect to the CallPilot system:
1 Use the Start menu to open the Dial-Up Networking window.
2 Double click the Dial-Up Networking connection you created for the CallPilot system.
3 Set the User ID to CallPilot.
4 Set the Password to administrator.
5 If there is a Domain box, set the Domain to the IP address you entered for the Dial-Up
Networking TCP/IP parameters of this connection. For example, enter 192.168.0.10.
6 Click the Connect button.
7. Press CHNG
.
8. Press ®.
Modem access:Y
CHNG OK
Modem access:N
CHNG OK