Filter
Top Products
78 Modem Access
P0990474 03
Enabling the modem on the CallPilot Mini/CallPilot 150
You must enable the CallPilot modem before you access the system using the modem.
Enabling Modem access using CallPilot Manager
1 Log on to CallPilot Manager.
2 Click the Configuration heading.
3 Click the Access Passwords link.
4 Enter a password in the Modem Access box.
5 Enter the password again in the Confirmation box.
6 Click the Submit button.
Enabling Modem access using a telephone (CallPilot 150 only)
Follow this procedure to enable the Modem access password using a telephone.
Note: To disable Modem access, clear the Modem Access and Confirmation boxes and
then click the Submit button.
1. Press
≤·°‹
.
2. Enter the system administration mailbox number and
password.
3. Press ›.
4. Press NEXT
.
5. Press NEXT
.
6. Press OK
.
7. Press CHNG
.
8. Enter the new Modem access password and press OK
.
Note: If you do not enter a password, Modem access is
disabled.
9. Re-enter the new Modem access password and press OK
.
10. Press ®.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Voice Mail:Y
CHNG NEXT
Dir avail:Y
CHNG NEXT
Match:Lastname
CHNG OK
Modem access:N
CHNG OK
Pswd:
RETRY OK
Again:
RETRY OK