Filter
Top Products
82 Modem Access
P0990474 03
Accessing the CallPilot system using CallPilot Manager
1 Start your web browser.
2 In the URL field, enter http://192.168.0.2.
3 Log on to CallPilot Manager
When you are finished with the CallPilot system, end your connection to the CallPilot modem.
Configuring your modem for normal modem connections
To configure your modem for normal connections:
1 Open the folder that contains the Nortel Networks Modem Configuration Utility
(CPsecureModem.exe).
2 Double click CPsecureModem.exe.
The Modem Configuration Utility opens.
3 Select the Configure Modem for Normal Operation option.
4 Click the OK button.
The Configuration Complete dialog box appears.
5 Click the OK button.
6 If you are using Windows NT 4.0, restart your computer.
After your computer finishes restarting, the modem is ready for normal modem connections.
Note: The IP address above is an example only. The IP address you enter is the IP
address of the CallPilot system plus one.
In the example above, the IP address shown is the default CallPilot IP address
(192.168.0.1) plus one (192.168.0.2).
Note: After you are finished accessing the CallPilot system, you must reconfigure your
modem if you want to use it for normal modem connections.