Filter
Top Products
Commands Appendix B
SMART-AG User Manual Rev 2 61
Field
Field
Name
ASCII
Value
Description
Field
Type
1 LOG
(ASCII)
header
- This field contains the command name or the
message header depending on whether the
command is abbreviated ASCII or ASCII
respectively.
-
2 port See Table 12, Detailed
Serial Port Identifiers on
Page 62
Output port
(default = THISPORT)
Enum
3 message Any valid message name,
with an optional A or B
suffix.
Message name of log to output Char [ ]
4 trigger ONNEW Output when the message is updated (not
necessarily changed)
Enum
ONCHANGED Output when the message is changed
ONTIME Output on a time interval
ONNEXT Output only the next message
ONCE Output only the current message. (default)
ONMARK Output when a pulse is detected on the mark 1
input, MK1I
5 period Any positive double value
larger than the receiver’s
minimum raw
measurement period
Log period (for ONTIME trigger) in seconds
(default = 0)
Double
6 offset Any positive double value
smaller than the period.
Offset for period (ONTIME trigger) in seconds. If
you wished to log data at 1 second after every
minute you would set the period to 60 and the
offset to 1 (default = 0)
Double
7 hold NOHOLD Allow log to be removed by the UNLOGALL
command (default)
Enum
HOLD Prevent log from being removed by the
UNLOGALL command