Filter
Top Products
|
OKIFAX 5750/5950102
For your machine, that location is Auto Dial 99 (Relay
Report Number).
!
Be sure to program the number in the format the relay
key station uses for dialing. For example, be sure to
include the access digit, if required.
Programming the Relay Report Number
1 Press Menu/Exit to enter the menu.
2 Press ᮢ to select Location Program, press Enter.
3 Press ᮢ to select Relay Report No., press Enter.
4 Enter the telephone number of the desired location using
the numeric keypad (40 characters max.), press Enter.
5 Press Menu/Exit to return to standby mode.
Relay Broadcast Report
The relay key station (hub) can send a confirmation report to
the relay initiating station when the relay fax session is
complete.
This confirmation report is called the Relay Broadcast
Report.
To receive the report, the telephone number of the relay
initiating station must be programmed into the specified
Auto Dial location. For your machine, that location is Auto
Dial 99 (Relay Report Number).
!
Be sure to program the number in the format the relay
key station uses for dialing. For example, be sure to
include the access digit, if required.
The Relay Broadcast Report shows:
· the page count of the original fax
· the location identification of each destination machine
the relay key station (hub) communicated with during the
relay fax session
· the page count of each fax sent to each destination
machine
· the results of each destination fax session
Initiating a Relay Broadcast
1 Load the document(s).
2 Press Menu/Exit to enter Menu.
3 Press ᮢ to select Relay Initiate TX, press Enter.
4 Enter the password (4-digit number) of key relay station,
press Enter.
5 Enter two-digit numbers of remote stations, press Enter.