Filter
Top Products
|
OKIFAX 5750/5950104
See “Sending a Fax to Multiple Locations, Group Faxing.”
You must provide the two-digit group number(s) to the relay
initiating station.
Create the Relay Password
To program the Relay Password
1 Press Menu/Exit to enter the menu.
2 Press ᮢ to select Setup, press Enter.
3 Press ᮢ to select ID Password, press Enter.
4 Enter the the 4-digit relay password, press Enter.
5 Press Menu/Exit to return to standby mode.
You must provide this password to the relay initiating
station.
Status of Relay Broadcast Report
Your machine [relay key station (hub)] can send a
confirmation report to the relay initiating station when the
relay fax session is complete.
This confirmation report is called the Relay Broadcast
Report.
For your machine to send the report, the telephone number of
the relay initiating station must be programmed into Auto
Dial location 99 of the initiating station. The number must
be programmed the way your machine (the hub) dials
numbers.
!
Be sure to program the number in the format the relay
key station uses for dialing. For example, be sure to
include the access digit, if required.
The Relay Broadcast Report shows:
· the page count of the original fax
· the location identification of each destination machine
the relay key station (hub) communicated with during the
relay fax session
· the page count of each fax sent to each destination
machine
· the results of each destination fax session
Printing the Relay Fax at the Hub
If you set Speed Access 27, Relay Print to ON, your machine
will print any relay fax it receives from a relay initiating
station.