Filter
Top Products
|
User’s Guide: English 87
3 Repeatedly press ᮢ to scroll through the list of location
IDs beginning with that letter.
This list is an alphabetical list of ALL Speed Dials and
Groups programmed into the machine.
Groups are indicated by a # before the name.
4 When the correct location is found, press the Start key to
begin faxing.
Broadcasting
What is a Broadcast Fax?
A broadcast fax is a fax sent to several locations.
A broadcast fax is a one-time event (not meant to be
repeated).
The broadcast, a collection of destination numbers [where the
fax is going to], IS NOT saved (programmed) into the
machine.
!
The locations you use during a broadcast CAN BE
programmed as One-Touch, 2-digit, or 3-digit Speed
Dials before you create a broadcast. Refer to
“Programming Speed Dial Numbers.”
Sending a Broadcast Fax
1 Load the document.
2 Enter the programmed location. Use a One-Touch key, 2-
or 3– Digit Speed Dial, Group Directory, or enter a
number on the numeric keypad.
3 Press Enter.
4 Repeat Steps 2 and 3 until all locations for the broadcast
are input.
!
If Auto Start is set to ON (default setting) you will have
2 seconds between steps 2 and 3 (if using a Speed Dial
and only after the first entry) to input the next location
before machine begins dialing. To change this, set Auto
Start (User Function #42) to OFF.
To delete an entry, press to back up.