Oki 59502 Fax Machine User Manual


 
|
Users Guide: English 115
T/F Timer Prg.
Speed access no. 62
When set to T/F, the machine will automatically distinguish
between incoming voice and fax communications. The T/F
timer controls how long the machine waits for the call to be
answered before switching to FAX mode.
Available settings are 20 and 35 seconds.
The default setting is 35.
CNG Count
Speed access no. 65
When set either in the T/F or TAD modes, the machine
detects the type of signal (calling tone, CNG) sent from the
remote location and initiates fax reception if required. This
function sets the CNG detection number.
The available settings are 1-5 times (numeric keypad input).
The default setting is 1.
Ring Response
Speed access no. 66
This function controls how long the machine waits before
answering an incoming call.
The available settings are 1 ring, 5, 10, 15 and 20 seconds.
The default setting is 1.
Distinctive Ring
Speed access no. 67
Some telephone carriers offer a service called Distinctive
Ring. Distinctive Ring lets you have different numbers on
one line, each with its own distinctive ring. You can then use
one number exclusively as a fax number without the expense
of a second line. Your local telephone carrier can provide you
with more information about this service, which usually has
an additional charge.
Available settings are:
OFF (not detected)
ON (detected)
SET (programmed)
The default setting is OFF.
!
You must have your local telephone carriers Distinctive
Ring service.
!
Your fax machine must be in FAX or PC answer mode,
and the PBX dial parameter must be set to OFF. Other