Filter
Top Products
Menu functions > 113
H
OW
TO
CHANGE
THE
SETTINGS
- A
DMINISTRATOR
You can set whether to ENABLE or DISABLE each category in the
user menu.
Disabled categories are not displayed in the User’s menu.
Only a system administrator can change these settings.
1. Turn OFF the printer.
2. Turn ON the printer while pressing the “ENTER” button.
When [ADMIN MENU] appears, take your finger off the
button.
3. Press the “ENTER” button.
4. When [ENTER PASSWORD] appears, press the “MENU+”
or “MENU-” button several times to display the 1st line of
the password and then press the “ENTER” button.
5. Enter your 4- to 9-digit password.
The default password is “aaaaaa”.
6. Press the “MENU+” button until the “category” you want
to change is displayed.
7. Press the “ENTER” button.
8. Press the “MENU+” or “MENU-” until the “item” you want
to change is displayed.
9. Press the “ENTER” button.
10. To execute it, press the “MENU+” button or “MENU-”
button to display “YES” and then press the “ENTER”
button. The printer automatically reboots.
11. When [PLEASE POW OFF/SHUTDOWN COMP] is displayed,
turn the printer OFF/ON
12. Press the “MENU+” button or “MENU-” until the “setting”
you want is displayed.
13. Press the “ENTER” button to enter [*] on the right side of
the setting selected.
14. Press the “ONLINE” button to switch to [ONLINE].