Filter
Top Products
Paper recommendations > 17
For paper lengths exceeding 431.8mm use paper stock up to
128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 50 sheets of transparencies or 10
envelopes can be loaded at one time, subject to a maximum
stacking depth of 10mm.
Paper or transparencies should be loaded print side up and top
edge into the printer. Do not use the duplex (two-sided printing)
function.
F
ACE
DOWN
STACKER
The face down stacker on the top of the printer can hold up to
250 sheets of 80g/m² standard paper, and can handle paper
stocks up to 176g/m². Pages printed in reading order (page 1
first) will be sorted in reading order (last page on top, facing
down).
F
ACE
UP
STACKER
The face up stacker at the rear of the printer should be opened
and the tray extension pulled out when required for use. In this
condition paper will exit via this path, regardless of driver
settings.
The face up stacker can hold up to 100 sheets of 80g/m²
standard paper, and can handle stocks up to 200g/m².
Always use this stacker and the multi purpose feeder for paper
stocks heavier than 176g/m².
D
UPLEX
UNIT
This option provides automatic two-sided printing on the same
range of paper sizes as tray 2 (i.e. all cassette sizes except A6),
using paper stocks from 64-105g/m².
NOTE:
The duplex unit comes as standard with dn models.