Filter
Top Products
Installing upgrades > 152
M
EMORY
UPGRADE
The basic printer model comes equipped with 256MB of main
memory. This can be upgraded with an additional memory board of
256MB or 512MB, giving a maximum total memory capacity of
768MB.
Installation only takes a few minutes, and does not require any
tools.
1. Switch the printer off and disconnect the AC power cable.
2. Press the cover release and open the printer’s top cover
fully.
3. Lift the front cover latch and pull open the front cover.
CAUTION
Observe antistatic precautions when carrying out this
installation.
WARNING!
If the printer has been powered on recently, the fuser
will be hot. This area is clearly labelled. Do not touch.