Filter
Top Products
Installing upgrades > 159
10. Close the front cover and the top cover, pressing down
firmly at each side to latch it closed.
11. Reconnect the AC power cable and switch the printer on.
12. When the printer is ready, print a menu map as follows:
13. Press the + button to access the Information Menu.
14. Press ENTER once for the menu map.
15. Press ENTER again to print the menu map.
16. When the menu map is printed, press ON LINE to exit the
menu system.
17. Examine the first page of the menu map.
18. Near the top of the page, between the two horizontal
lines, you will see the current printer configuration. This
should now indicate that the hard disk unit is installed.
CAUTION!
After installing additional memory (hard disk drive),
any covers removed or doors opened must be closed
or replaced and secured to prevent risk of fire.