Filter
Top Products
USING YOUR PRINTER > 17
Forms Tear-Off set to ON
With paper loaded and the printer ON and selected:
1.
Press
PARK
(6) to park the paper.
The SEL light goes off and the red alarm light comes on.
2.
Press
FF | LOAD
(4) to load the paper.
3.
Wait briefly until the paper moves up to the tear position, then
press and hold
TEAR
(5).
The paper moves to the current TOF and the SEL light is
illuminated.
4.
If the printer is ON line, press
SEL
|
MENU
(1) to take the
printer
OFF
line.
The SEL light goes out.
5.
Hold down
SHIFT (2)
, then:
l Press
LF | Micro Feed Down
(3) to set the TOF
higher
(the
paper moves down).
l Press
FF/LOAD | Micro Feed Up
(4) to set the TOF
lower
(the paper moves up).
(When you begin pressing the Micro Feed key, the printhead will move
to the right).
6.
Press
SEL | MENU
(1) to save the setting and place the printer
back on line.
To reset the Top of Form to the factory default, see the next page.
1
2
3
4
6
75