Filter
Top Products
MAINTENANCE > 61
CLEANING THE HOUSING
You should clean the printer housing every six months (or after about
300 hours of operation).
1.
Turn off the printer.
2.
Use the platen knob to back the paper out of the printer.
3.
Open the access cover (1) and remove the pull-up roller
assembly (2).
4.
Use a clean, dry cloth to dust around the carriage shaft and
platen. Remove any loose bits of paper.
CAUTION!
Never use strong solvents or strong detergents on the cabinet—they
could damage the housing.
CAUTION!
Make sure the printer is turned off before you open the access cover.
1
2