Filter
Top Products
USING YOUR PRINTER > 20
CHANGING THE FORMS TEAR-OFF SETTING
The default setting for Forms Tear-Off is
OFF
.
To change the Forms Tear-Off setting:
1.
Press
SHIFT
(2) +
SEL
(1).
2.
Press
GROUP
(3) repeatedly until the Rear Feed or Bottom Feed
group shows in the first column of the printed line, depending
on which paper feed you are using,
3.
Press
ITEM
(4) repeatedly until Form Tear-Off appears in the
second column:
Rear Feed Form Tear-Off Off
4.
Press
SET
(5) until the time interval you wish to select appears
in the third column:
Rear Feed Form Tear-Off 1 Sec
5.
Press
SHIFT
(2) +
SEL
(1) to exit Menu Mode and save the
setting.
MANUAL FORMS TEAR-OFF
If you don’t wish to engage the Forms Tear-Off feature, you can
advance:
l rear-feed continuous forms loaded on the built-in tractor
or
l bottom-feed continuous forms loaded on the optional push
tractor
up to the tear-off position manually by pressing
TEAR
(5).
1
2
3
4
6
75