Filter
Top Products
USING YOUR PRINTER > 27
PRINTER RESET
Clearing some error conditions requires that you reset (reinitialise)
the printer. To do this:
1.
Press and release
SEL
(1) to take the printer off-line.
The
SEL
light goes out.
2.
Press and hold
SHIFT
(2), then press the
RESET/CHARACTER
PITCH
key (5).
EMULATIONS
l IBM
®
Proprinter III —
factory setting
l Epson
®
FX
l Oki
®
MICROLINE
®
Changing Emulations
Make sure paper is loaded.
1.
Press and hold
SHIFT
(2), then press
SEL
(1).
2.
Press
LF
(3).
The following line will print:
Printer Control Emulation Mode IBM PPR
3.
Press
TEAR
(4) repeatedly until the emulation you wish to
select prints in the right-hand column.
4.
Press and hold
SHIFT
(2), then press
SEL
(1) to save your
setting and exit the Menu Mode.
NOTE
Pressing
SHIFT
and
RESET
reinitialises the printer, but does not affect
any menu settings and does not reset the printer to the factory defaults.
For information on resetting the printer to the factory defaults, see
“Resetting the Menu to the Factory Defaults” later in this chapter.
1
4
3
2
5