Filter
Top Products
11
Menu Mode: Configuring Your Printer
Entering/Exiting the Menu Mode
To enter or exit the menu mode, press MENU.
Changing the Menu Settings
To change menu settings:
1. Press
MENU to place the printer in the menu mode.
2. Press
GROUP until the group in which you wish to make a change appears on the
second line of the display.
3. Press
ITEM until the item which you wish to change appears on the display.
4. Press
OPTION until the value you wish to set for that item appears on the second line
of the display.
5. Press
STORE to save the setting.
An asterisk (*) will appear next to the value on the display.
6. Repeat steps 2 through 5 for each item you wish to change in the menu.
7. Press
MENU to exit the menu mode.
For example, to change to 12 cpi pitch:
1. Press
MENU.
2. Press
GROUP until Font appears on the display.
3. Press
ITEM until Pitch appears on the display.
4. Press
OPTION until 12 CPI appears on the display.
5. Press
STORE.
An asterisk (*) appears next to 12 CPI.
6. Press
MENU.
Saving Configurations
You can establish two user-defined groups of menu settings—CFG1 and CFG2—then
switch back and forth between them.
When you first start up your printer, both CFG1 and CFG2 are set to the same settings as
the factory settings. You will see CFG1 (Configuration 1) at the end of the second line of
the printer display.
If you enter the menu and change settings, the new settings will automatically be stored
under the configuration—CFG1 or CFG2—which appears on the second line of the
display when you make the changes.