Filter
Top Products
111
D: Hex Dump Mode
Running a Hexadecimal Dump
When the printer is in the Hex Dump Mode, all data received, including text and printer
commands, will be printed in both hexadecimal and ASCII format.
Note: In the ASCII format, all non-printable characters will be represented by a period.
Engaging the Hex Dump Mode
To engage the Hex Dump Mode:
1. Be sure paper is loaded.
2. Turn the printer off.
3. Press and hold FF/LOAD while turning the printer on.
The printer will print the line “Hex Data Dump” and be ready to receive data in the
Hex Dump Mode.
Running a Hex Dump Test
To run the test, send data to the printer while it is in the Hex Dump Mode.
Exiting Hex Dump Mode
There are two ways to exit the Hex Dump Mode:
• Hold
SHIFT and press ON-LINE/RESET .
OR
• Turn the printer off, then on again.