Filter
Top Products
E-18
Connecting Personal Computers and Video Equipment
● Connecting this unit with a personal computer permits presentation data to be projected as a large
screen display at conferences, lectures, and on other occasions.
Connections with PC Connectors
Please check the following matters before making connections to the
personal computer.
* Suitable resolution is 1024ן768 pixels (XGA), and the displayable resolution is 1280ן1024 pixels
(SXGA).
Note that input of a resolution that exceeds the displayable resolution will cease to be projected and
should this be the case, you will need to change the resolution to a displayable resolution at the
computer side. Check with “Table of Supported Frequencies” on Page E-70.
* The setting method of the personal computer will differ depending on the personal computer that you
are using. For information, read the instruction manual for your personal computer, read the on-line
help, or contact the manufacturer of your personal computer.
Personal Computers with a DVI Connector
* Make the connection with a DVI-D cable (which is available as an option) and the PC connector of the
projector.
When connecting, arrange the connectors in the proper orientation and plug in. Turn the screw knobs
and fasten to the connector of the main unit.
PC
VIDEO
AUDIO
Monitor output
Personal
computer
DVI-D cable (Available as an option. Stock No. 205202)
Note
* Please see Page E-28 “Input Selection” for information about making input selections.
* This projector uses a 29-pin DVI connector that supports the digital interface. Digital signal TMDS (Transition
Minimized Differential Signalling) of the DVI (Digital Visual Interface) standard is used.