Filter
Top Products
E-35
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and
video image (up to 10 times).
(1) Press the ZOOM button.
The zoom selection display will appear.
ENTER
ZOOM
MENU
HKSTN
VKSTN
VOL
CANCEL
(4)(3)
(1)
(2)
+–
Zoom
0
(2) Enlarge to the desired size.
Each press of the (+) button enlarges the image and each
press of the (–) button makes the image smaller (returning it
to 1:1).
(3) Pressing the cursor (▲▼
ᮤ
ᮣ
) buttons at the time of the zoom
operation will cause the display position to move.
(There will not be any movement when zoom is at 0.)
(4) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 sec-
onds, the display will close automatically.
(1)
(2) (3)
(No enlargement) (Approximately 2 times enlargement) (Movement)
Note
After magnifying the image, be sure to use the ZOOM button to bring the gauge value back to “0”.
The image can also be moved in the following circumstances.
* When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is
higher than the display resolution of the projector.
* When “Aspect” is set to “Zoom” by the video signal.
Note
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots
are being digitally corrected so that they are not conspicuous.
* Movement of the screen will not be possible when the menu screen is being displayed.