Filter
Top Products
E-54
Aspect
Filter
Projection
Auto
3
Keystone
V Keystone
H Keystone
Keystone Save
Off
–
+
0
–
+
0
Aspect
Filter
Projection
Auto
3
Keystone
Picture in Picture
Aspect
Filter
Projection
Auto
3
Keystone
Picture in Picture
Size
Position
Off
Keystone Save
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values when projecting after the
power cable has been disconnected and then reconnected.
1. Select item name “Keystone” and press the cursor (
ᮣ
) but-
ton. The sub menu will open.
2. Select “Keystone Save” with the cursor (▲▼) buttons and
set with the cursor (
ᮤ ᮣ
) buttons (or with the main unit ( )
button).
Off .............. The keystone adjustment values return to the initial values when the power cable is unplugged.
On............... The keystone adjustment values are retained in storage even when the power cable has been unplugged.
Note
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is from the standby condition, the
picture is projected using the previous keystone adjustment values.
Picture in Picture
This function displays the picture from the VIDEO jack as a
sub-picture on the input screen (i.e., the main picture) from
the PC connector.
1. Select item name “Picture in Picture” and press the cursor (
ᮣ
)
button. The sub menu will open.
2. Select “Size” or “Position” with the cursor (▲▼) buttons and set
with the cursor (
ᮤ ᮣ
) buttons (or with the main unit ( ) button).
View
Note
• Sizes of a sub-picture vary depending on the signal input to the PC connector.
• The adjustment display and picture will not appear unless a signal is input to the PC connector.
Size Settings
Position Settings
Display at upper left of main screen
Display at upper right of main screen
Display at center of main screen
Display at lower left of main screen
Display at lower right of main screen
On Off
Sub-picture
Main-picture