Filter
Top Products
E-59
Info.
● Select menu name “Info.”.
See “Menu Operation Method” on Pages E-37 to E-45 for information about performing menu operations.
The item name display will differ depending on the input signal. See “List of Item Names Offering Input
Selection and Adjustments/Settings” on Pages E-44 and E-45.
Status
This displays information about the unit.
Select item name “Status” and press the cursor (
ᮣ
) button.
Status
Lamp Timer Reset
Factory Default
Lamp Timer
12h
VP Series
Version:7,0,0,0,0
www.olympus.com
Display Contents:
Projector model, firmware version, and the internet
home page address of OLYMPUS CORPORATION.
Factory Default
This function returns the adjustments and settings of all the
input sources to the standard factory default values.
Select item name “Factory Default” and press the cursor (
ᮣ
) but-
ton.
Status
Lamp Timer Reset
Factory Default
Lamp Timer
12h
Press "ENTER" to Factory Default Set
The display “Press "ENTER" to Factory Default Set”
will appear.
A press of the ENTER button sets the factory defaults.
Main unit operation: Press the (AUTO) button.
Items that are not set to the factory default:
Projection method, YPbPr, Language, and Lamp Timer
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the
reset operation when the lamp cartridge has been replaced.
Select item name “Lamp Timer Reset” and press the cursor (
ᮣ
)
button.
The display “Press "ENTER" to Lamp Timer Reset”
appears.
A press of the ENTER button resets the timer
Main unit operation: Press the (AUTO) button.
Status
Lamp Timer Reset
Factory Default
Lamp Timer
12h
Press "ENTER" to Lamp Timer Reset