Filter
Top Products
35
Listening to the Radio—Continued
With the Preset Write function, you can manually preset
individual AM and FM stations. Presets make it easy to
select your favorite stations and eliminate the need to
tune the radio manually each time you want to change
stations. FM stations can also be preset automatically
(see page 34).
Note:
If the current FM station supports RDS and PS (Program
Service Name), the station’s name will be displayed
instead of the frequency. (See page 33 for more on
RDS.)
After Storing Presets You Can:
• Select them (see page 36)
• Name them for easy identification (see page 39)
• Copy them (see page 37)
• Erase them (see page 38)
Presetting AM/FM Stations Manually
1
Tune into the station that you want
to store as a preset.
2
Press the [TOOLS] button and
then press [ENTER] with “Tool”
selected.
3
Use the Up and Down [ ]/[ ] but-
tons to select “Preset Write?”, and
then press [ENTER].
The preset number flashes.
To cancel the Preset Write function at
this point, press the [RETURN] button.
4
Use the Up and Down [ ]/[ ] but-
tons to select a preset.
/ / /
BAND
TOOLS
ENTER
• You can store up to 40 stations as presets and this
can be any combination of AM and FM stations.
For example, 27 FM and 13 AM, or 18 FM and
22AM.
• Although AM and FM presets share the same
numbers, they’re selected independently. For
example, preset #1 will store an AM station when
the AM band is selected, and an FM station when
the FM band is selected.
• Stations can be stored to presets in any order. For
example, you could store preset #5 first, #1 sec-
ond, and so on.
About Presets
Audio
Record
Tool
Tool
01
Preset Write?
Tool
02
Preset Write?
5
To store the station, press
[ENTER].
If no station has yet been stored to the
selected preset, “Complete!” appears and
the station is stored.
If a station has already been stored in the
selected preset, the message
“Over Write?” appears.
To overwrite the previously stored sta-
tion, press the Up and Down [ ]/[ ] to
select “Yes”, and then press [ENTER].
To not overwrite the previously stored
station, press the Up and Down [ ]/[ ]
to select “No”, and then press [ENTER].
If the message “Memory Full” appears,
all 40 presets have been stored and you’ll
need to erase some presets before you
can store any more stations (page 38).
6
Repeat steps 1 to 5 to preset more radio
stations.
Complete!
Tool
Over Write? :Yes
Preset Write?
Memory Full