Filter
Top Products
65
Using the Timers—Continued
With the play timer, you can automatically turn on the
CD/HDD receiver, start playback, and turn off the CD/
HDD receiver at a specified time. This timer is conve-
nient to use as a morning alarm.
Before setting the timer:
• You must set the clock before you can set the timers
(
page 62).
• Before setting a timer to turn on the radio, you must
preset the station you want to use (see
pages 34 and
35).
Notes:
• When four timers have already been programmed, cancel
one of the timers already set, and then set a new one.
• Some operation cannot be done about one minute before
the On time of the timer.
See page 67 for canceling, changing, and deleting the
play timer.
Using the Play Timer
1
Press the [TIMER] button.
2
Select a timer number.
Use the Up and Down [
]/[ ] buttons
to select Timer1, 2, 3, or 4 and then
press [ENTER]. The Timer indicator
lights up and the selected timer number
flashes on the display.
3
Set the status of the timer.
Use the Up and Down [
]/[ ] buttons
to select “On”, and then press
[ENTER].
4
Set the type of the timer.
Use the Up and Down [
]/[ ] buttons
to select “Play”, and then press
[ENTER].
5
Select the source.
Use the Up and Down [
]/[ ] buttons
to select the source, and then press
[ENTER].
You can select the following sources:
HDD, CD, USB, FM, AM, LINE,
TAPE, DOCK, or DIGITAL
Select a preset for FM or AM.
Timer 1
:Off
Timer Mode
TIMER indicator
TIMER number
6
Set the day and time.
Use the Up and Down [
]/[ ] buttons
to select “Once” or”Every”, and then
press [ENTER].
Select “Once” for on-off operation.
Select “Every” to perform the same
operation every week. Use the Up and
Down [
]/[ ] buttons to set the day
and then press [ENTER].
If you selected “Once”:
Use the Up and Down [
]/[ ] buttons
to select the day, and then press
[ENTER].
If you selected “Every”:
Use the Up and Down [
]/[ ] buttons
to select the day, “Everyday”, or “Days
Set”, and then press [ENTER].
You can select the following:
If you selected “Days Set”, use the Up
and Down [
]/[ ] buttons to select the
first day, and then press [ENTER]. Use
the Up and Down [ ]/[ ] buttons to
select the last day, and then press
[ENTER]. You can select only consec-
utive days.
7
Set the On time and Off time.
Use the Up and Down [
]/[ ] buttons
to select the time, and then press
[ENTER]. You can also use the number
buttons.
8
Use the Up and Down [ ]/[ ] but-
tons to specify the CD/HDD
receiver’s volume level, and then
press [ENTER].
If you selected “Last”, the volume is set
at the same level as the last playback. If
you selected “Mute”, the output is
muted. You can also set the volume
from “01” through “41” to “Max”.
9
Press the [ON/STANDBY] button
to set the CD/HDD receiver to
Standby.
Note:
Be sure to set the CD/HDD receiver to
Standby, otherwise the timed operation
will not work.
SUN
TUE
MON
Days Set Everyday
WED THU
SAT
FRI