Filter
Top Products
50
Recording (Transferring Data)—Continued
You can record broadcasting program.
Tip:
The title of the recorded program is automatically consists
of date, start time of recording, radio station name (its band
and frequency if it is not preset).
You can record audio from external components con-
nected to LINE1, LINE2, or LINE3. You can't record
audio from external components connected to DIGITAL
OPTICAL IN.
Tip:
The title of the recorded sound is automatically consists of
date, start time of recording, input source name (if the input
source name has been changed in the steps on page 45, the
changed name is used).
Recording from Tuner
1
Switch the input source.
Press the [BAND] button to select FM or
AM. You can also use the [INPUT
SELECTOR] button to select the input
source.
2
Tune into the radio stations.
See “Tuning into AM/FM Radio Sta-
tions” on page 32 and “Selecting Preset
Stations” on page 36.
3
Press the [ ] button according
to the destination of recording.
When recording onto the HDD, press the
HDD REC [ ] button. When record-
ing into a USB device, press the USB
REC [ ] button.
4
Start recording.
Press the Play [ ] button or [ENTER].
(The above is an example when the HDD
REC [ ] button is pressed.)
5
Press the Stop [ ] button to can-
cel the recording.
“Complete!” will be displayed, and the
recording ends.
To pause recording, press the Pause [ ]
button. To resume recording, press it
again.
or
Ready?
or
20080820_0034
FM 76.50MHz
00:00:25
Complete!
Recording from Line Input
1
Switch the input source.
Press the INPUT [ ]/[ ] buttons to
select LINE1, LINE2, or LINE3. You
can also use the CD/HDD receiver’s
[INPUT SELECTOR] button to select
the input source.
2
Press the [ ] button according
to the destination of recording.
When recording onto the HDD, press the
HDD REC [ ] button. When record-
ing into a USB device, press the USB
REC [ ] button.
3
Start the playback of the recording
source.
When recording from a -capable
component, the CD/HDD receiver auto-
matically starts recording. Otherwise,
first press the Start [ ] button or
[ENTER] and then start the playback of
the external component.
4
Press the Stop [ ] button to can-
cel the recording.
“Complete!” will be displayed, and the
recording ends.
During the recording from the -capa-
ble components, if the playback is
paused or stopped, the CD/HDD receiver
switches to the recording standby mode.
Pressing the button again resumes the
recording.
or
or
20080820_0035
LINE
00:00:13