Filter
Top Products
2
1
2
4
3
Options
7-12
7.4 Cut Sheet Tray
Use the cut sheet tray (1) to collect a batch of paper sheets or formsets in the
output area.
7.4.1 Installing the Cut Sheet Tray
S Remove the manual sheet feeder (6).
S Remove the upper tractor cassette.
S Insert the cut sheet tray (1) in position of the upper tractor cassette.
S Lift the lower part (2) of the cut sheet tray and align it to length of the paper
in use.
S To get a correct collection of the sheets or forms loosen screw (3) and swivel
the part (4) down for heavy paper (> 80 g/m²) or up for light
paper (< 80 g/m²).
Note: Make a test print and repeat the procedure if necessary.
S Mount the ASF cassettes (see paragraph 7.2.3 Installing the ASF
Cassettes).