Filter
Top Products
I
Safety Regulations
The printer PP 806 (CI - 8060) fulfills the safety regulations according to UL
1950 and
VDE (IEC 950) and CNA/CSA C22.2 / No. 950 for computer systems.
The mains cable must be connected to a ground protected wall-socket. The
selected voltage of the printer needs to fit to the local voltage.
The power plug must be easily accessible at any time so that it can be
disconnected immediately in case of danger or for maintenance purposes.
Comme le câble de secteur sert de dipositif d'arrêt-urgence, sa connexion à l'im-
primante doit être tout le temps accessible.
Before installing the printer, check the surrounding conditions in which the
printer will be placed (see next page, Operating Environment).
During a thunderstorm you should never attempt to connect or disconnect any
data transfer cables.
The power supply should only be opened and checked by authorized personnel.
Repairs and maintenance may only be attempted by authorized personnel as
well. Repairs done inappropriately may cause damage and severe danger for
the user.
There is a warning symbol to draw the user's attention to possible injuries:
This symbol is visible when the rear cover has been
opened. It indicates that the print head is extremely
hot after long periods of printing.
Ce signal de danger se présente quand le cache
derrière de l´imprimante soit retiré pour indiquer que
la tête d´impression peut être extrèmement chaude
après imprimer très longtemps.