Filter
Top Products
Description of the Individual Menu Items
4-2
4.1 TEST MODES
S PRINT MENU
This test printout shows the current settings of all parameters and the
contents of the macros. This printout is helpful for future reference and when
macros are to be changed. For detail see chapter 3.2 Standard
Configuration.
S CONFIGURATION
This test printout lists all available fonts, contains the page count to identify
the actual number of printed pages, and gives information on technical
releases which are intended for service purposes. A sample you will find in
chapter 1.9 PRINT MENU.
S PRINT LETTER
This test printout produces a standard letter (ECMA-132) which can be used
for measuring the printer's throughput. See a sample in chapter 1.9 PRINT
MENU.
S PRINT LINES
Tis test printout shows a pattern of all printable characters. Use this to check
if the printer operates correctly. See a sample in chapter 1.9 PRINT MENU.
S HEX DUMP
This function allows to analyze that the data received by the printer. Control
codes are no longer carried out, instead all data is printed in hexadecimal
format and as ASCII characters. Any non-printable characters, such as
carriage return are only represented as a single dot (.) in the ASCII list.
It may happen that the transmission of data to the printer will be interrupted
during Hex Dump. In this case, printing of data received after the break is
started on the next available line. The result is an irregular right margin which
is not an indicator for any loss of data.