Filter
Top Products
Troubleshooting and Diagnostics
Display That means ... Cause / Action
6-4
CHECK TOF POS Perforation isn´t S Adjust the perforation of
adjusted with the tear the form with the tear off
off edge edge by pulling the paper
forwards or backwards
S Check if print head is in its
park positon
S Ribbon cassette correct
installed ?
S see also diagram 6.8.5
Paper Jam TRF
ELECTR-FAN ERROR Fan error S Press key again
S Hardware error; call
service
FRAMING ERROR Protocol error serial S Check protocol setting of
interface printer and host
S Repeat data transfer
GAP ERROR Print gap incorrect, S Printer not locked
green ribbon support S Wrong distance between
not in right position print head and print bar
S Pins of the green ribbon
support broken
S Check if print head is in its
park positon
S See also diagram
6.8.7 Gap Error
S Error still there call service
LOCK COVER Housing will be locked S Wait
MOTOR FAN ERROR H-motor fan error S Press key again
S Hardware error; call
service