Filter
Top Products
Troubleshooting and Diagnostics
6-2
6.1 Power-related Problems
Power indicator does not light when power is switched On:
S Check that the power cord and plug are securely fitted to the printer and to a
mains outlet.
S Ask for the power connector connections (and fuse) to be verified.
S Ask for the building electrical supply to be verified.
S PM correct inserted ?
6.2 Error Messages
After switching the power ON the printer runs a self test. During the test the follo-
wing messages may show up on the display:
Display That means ... Cause
No information, No power S Mains cable not connected.
POWER ON
LED not not lit or ......... S PM not installed
S PM not property installed
LED lit but no Hang up in reset after S print PSU defective
reaction power on S Print CU-DEV defective
After all tests have been passed successfully the following message will be
displayed:
READY 1 ELQ Printer is OK S Printer ready for operation
or
BUSY 1 ELQ