Filter
Top Products
114
Print Reduction
This machine can use Letter, Legal or A4 size plain paper for recording. Sometimes, oversized documents sent
to you by the other parties cannot be printed within a single page. When this occurs, the document will be
divided into separate pages.
This machine is equipped with a Print Reduction function to solve this problem. You may select the most
appropriate setting from the selections described below.
1. Automatic Reduction
Each page of a received document is first stored in memory. Based on the document length, your machine will
automatically calculate the suitable reduction ratio (70% to 100%) to print the entire document on a single page.
If the received document is extremely long (over 39% longer than the recording paper), the document will be
divided into separate pages when printing with no reduction.
2. Fixed Reduction
You can pre-determine the reduction ratio from 70% to 100% in 1% steps. The document(s) you receive will be
reduced to the fixed ratio regardless of size.
Selecting the Print Reduction Mode
Set Fax Parameters as shown below. (See page 73.)
1. To set Automatic Reduction mode.
(1) No. 024 Print Reduction set to “Auto”.
2. To set Fixed Reduction mode.
(1) No. 024 Print Reduction set to “Fixed”.
(2) No. 025 Reduction Ratio set to any number between 70% through 100%. (see Note 1)
EX: A4 to A4 - 96%
A4 to Letter - 90%
Letter to Letter - 96%
Legal to Letter - 75%
(see Note 1)
Note:
1. If the sending side is set to print the header on the outside of the copy area, more reduction ratio will be required.
Receiving Documents via Telephone Line