Filter
Top Products
166
Printouts and Reports
When you use Relayed Transmission, your machine will print the following two reports to help you check and
keep track of your faxes.
1. Relay XMT Report (COMM. JOURNAL)
When your machine finishes transmitting to the Relay Station, it will print a COMM. Journal when the Fax
Parameter No. 143 is set to "2"(Always) or "3"(Inc. Only), this tells you whether the transmission was
successful or not.
2. Transmission Journal
When the Relay Station receives instructions for a relayed transmission, a notification is emailed to the
registered manager (see "Setting up your DX-2000 as an Internet Relay Station" on page 158).
Sample Relay XMT Report (COMM. JOURNAL)
(see Note 1)
************** -COMM. JOURNAL - ***************** DATE 12-DEC-1999 **** TIME 15:00 **** P.01
(1) (2) (3)
MODE = RELAYED TRANSMISSION START= 12-DEC 15:00 END= 12-DEC 15:00
FILE NO.= 050
(4)
(5) (6) (7) (8) (9)
STN COMM. ONE-TOUCH STATION NAME/EMAIL ADDRESS/TELEPHONE NO. PAGES DURATION
NO. ABBR NO.
001 R-OK 4681111234 001/001 00:00:15
002 R-OK 3961111234 001/001 00:00:15
- PANASONIC -
*************************************** - HEAD OFFICE - ****** - 201 555 1212 - *******
(1) Indicates the communication
mode
(2) Start time of communication
(3) End time of communication
(4) File number : 001 to 999
(5) Sequential number of the stations
(6) Communication result : "R-OK" indicates that the Relayed XMT Request was successful.
3-digit Info Code (see page 183) indicates that the communication has failed.
(7) Telephone Number, Email
Address or Station Name of the
end receiving station
(8) Number of pages transmittedv : 3-digit number represents the number of pages successfully transmitted.
(9) Duration of communication
Note:
1. If you transmit through more than one Relay Station, you will receive a separate Result Report.
Relayed Transmission