Filter
Top Products
72
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST 1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
002 RESOLUTION 1 Standard Setting the home position of the RESOLUTION key.
2 Fine
3 400 dpi
004 STAMP 1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in memory,
see Fax Parameter No. 028.
2On
005 MEMORY 1 Off Setting the home position of the MEMORY key.
2On
006 DIALLING METHOD 1 Pulse Selecting the dialling method.
2 Tone
007 HEADER PRINT 1 Inside Selecting the printing position of the header.
Inside : Inside TX copy area.
Outside : Outside TX copy area.
No print : Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT 1 Logo, ID No. Selecting the header format.
2 From To
009 RCV’D TIME PRINT 1 Invalid Selecting whether the machine prints the received date & time,
remote ID, percentage of reduction and page number on the
bottom of each received page.
2 Valid
010 KEY/BUZZER VOLUME 1 Off Selecting the volume of the Key/Buzzer tone.
2Soft
3 Loud
012 COMM. JOURNAL
1 Off
Selecting the home position of printout mode for COMM. Journal
Off/Always/INC.
Off : Does not print.
Always : Always prints.
Inc. only : Prints only when communication has failed.
2Always
3 Inc. only
013 AUTO JOURNAL PRINT 1 Invalid Selecting whether the machine prints the journal automatically
after every 100 transactions.
2 Valid
014 FILE ACCEPTANCE
REPORT
1 Invalid Selecting whether the machine prints the file acceptance journal.
If you set this parameter to valid, a journal will print after any
memory communication.
2 Valid
017 RECEIVE MODE 1 Manual Setting the reception mode to automatic or manual.
2Auto
Customizing Your Machine