Filter
Top Products
182
Print Copy Quality
Vertical lines printing
on the received
document
Print out a Journal report (e.g. FUNCTION, 6, 1,SET and 1)
and check quality to make sure whether your machine has
trouble.
If Journal report quality is OK, your machine has no problem,
report to the sending party that they have a problem.
If copy is NG, replace the Toner Cartridge.
169
28
Fuzzy print 1. Make sure you are using the correct paper for the best
possible print quality.
2. Try reversing the recording paper to the other side.
200
Missing dots or lines/
inconsistent darkness
within print
1. Make sure you are using the correct paper for the best
possible print quality.
2. Replace the Toner Cartridge.
200
28
Fading print Your Toner Cartridge may be running out of toner. Replace
the Toner Cartridge.
28
Faint print You may need to choose a different paper for the best possible
print quality.
200
Communication
No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.
195
No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (AUTO JOURNAL PRINT) is
set to "Valid" (default setting) and the machine is printing
the received document from memory, which also happens
to be the 100th transaction, the machine will not auto
answer until the Transaction Journal completes printing.
195
113
72
Cannot transmit or
receive
An information code will be shown on the display. Refer to the
information code table to find out the trouble.
183
No Unit Operation
No unit operation To reset the machine, turn-off the Power Switch for a few
seconds then turn it on again.
33
Mode Symptom Cause / Action page
Troubleshooting