Filter
Top Products
13
123
456
789
0
STOP
COPY
START
TONE
TONE
MEMORY
DIRECTORY
SEARCH
INTERNET
VOLUME
+
-
CONTRAST
HALFTONE
RESOLUTION
PAUSE
REDIAL
ABBR
SUB-ADDR
FLASH
FUNCTION
CLEAR
SET
MONITOR
STAMP
Used to set Normal, Lighter, or Darker.
(See page 79)
Used to start or select the function and
sub-functions.
These functions are explained in detail on
page 10.
Used to search for a station name.
(See page 85 and 96)
Used to enter a pause when recording or
dialling a telephone number, or to redial the
last dialed number. (See page 106)
Used to start Abbreviated Dialling. (See page
95 and 100)
Used to separate the Sub-address from the
telephone number when dialling, or to access
some features of your PBX.
Used to erase the previously entered input.
Used to set operations.
Used to start On-Hook Dialling. (See page 103)
Used to cancel operations. When it is
pressed, the machine will return to standby.
Used to make copies.
(See page 117)
Used to start operations.
Used for Manual Number Dialling,
recording phone numbers, and selecting
functions.
Used to temporarily change the Dialling
Mode to Tone when Pulse mode is set.
Provides OFF, QUALITY or FAST settings for
halftone documents. (See page 80)
Used for the following:
• Adjust the monitor and ringer volume.
(See page 35)
• Move the cursor while entering numbers
and characters.
• Search the station name for Directory
Search Dialling.
• Confirm the entered station for multi-station
communication.
• Select functions.
• Confirm the current communication modes
(e.g. Page number, ID, Dialed Telephone
number, File number) when the unit is ON
LINE.
Used to set Standard, Fine and 400 dpi.
(See page 79)
Used to select either memory or direct
communication.
(See page 91 to 101)
Used to select Internet communication.
(See page 82)
Used to turn the verification stamp ON or OFF.
(See page 80)
Control Panel
1