Panasonic KX-FP145 Fax Machine User Manual


 
8. Programmable Features
51
8.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 15 for details.
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 21 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 22 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 23 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR [±]
To print a sending report for fax transmission
results (page 31).
ERROR (default): A sending report will be
printed only when fax transmission fails.
ON: A sending report will be printed out after
every transmission.
OFF: Sending reports will not be printed out.
Code #06: Changing the ring setting in
TAM/FAX mode (Telephone Answering
Machine/Fax mode)
TAM RING COUNT
RINGS=2 [±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
1, 2 (default), 3, 4, TOLL SAVER or
RINGER OFF. See page 35 for details.
Note:
L Set feature #77 to TAM/FAX (page 54)
beforehand.
Code #06: Changing the ring setting in FAX
ONLY mode
FAX RING COUNT
RINGS=3 [±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select 1, 2, 3 (default) or 4.
Note:
L Set feature #77 to FAX ONLY (page 54)
beforehand.
Code #10: Changing the maximum incoming
message recording time
RECORDING TIME
MODE=VOX [±]
VOX (default): Unlimited.
1 MIN: Up to 1 minute.
Code #11: Setting the remote operation ID
REMOTE TAM ID
ID=111
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Enter any 3-digit number except a number
using 0 or 7.
L The default ID is 111.
4. Press {SET}.
5. Press {MENU}.
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE [±]
If you cannot dial, change this setting depending
on your telephone line service.
TONE (default): For tone dial service.
PULSE: For rotary pulse dial service.
Code #17: Setting the ringer pattern
RINGER PATTERN
MODE=A [±]
You can select A (default), B or C.
FP145.book Page 51 Thursday, January 15, 2004 10:46 AM