Filter
Top Products
6. Fax (KX-MB772 only)
38
3 Enter the telephone number, up to 32 digits. i
{SET}
L To program other items, repeat steps 2 to 3.
4 {MENU}
Note:
L A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.3 Editing a stored item
1
{DIRECTORY}
2 Press {V} or {^} repeatedly to display the desired
item. i {MENU} i {*}
3 Edit the name if necessary. For further details, see
the storing procedure on page 37. i {SET}
4 Edit the telephone number if necessary. For further
details, see the storing procedure on page 37. i
{SET}
6.2.4 Erasing a stored item
1
{DIRECTORY}
2 Press {V} or {^} repeatedly to display the desired
item. i {MENU} i {#}
L To cancel erasing, press {STOP}.
3 {SET}
6.3 Sending a fax using one-
touch dial feature and navigator
directory
Before using this feature, store the desired names and
telephone numbers into one-touch dial feature and
navigator directory (page 37).
L Make sure that the {FAX} light is ON.
6.3.1 Using the scanner glass
1
Set the original (page 19).
2 If necessary, change to the desired resolution (page
36) and the desired contrast (page 36).
3 Enter the fax number.
Using stations 1–3:
Press the desired station key.
Using stations 4–6:
Press {LOWER}, then press the desired station key.
Using navigator directory:
Press {DIRECTORY}, then press {V} or {^}
repeatedly to display the desired item.
L To send a single page, skip to step 6.
L To send multiple pages, go to the next step.
4 Press {QUICK SCAN} to scan the document into
memory.
5 Place the next page. i {SET}
L To send more pages, repeat this step.
6 {START}
To search for a name by initial
Example: “LISA”
1. {DIRECTORY}
2. Press {V} or {^} to initiate the navigator directory.
3. Press {5} repeatedly to display any name with the
initial “L” (see page 63 for character entry).
L To search for symbols, press {*}.
4. Press {V} or {^} repeatedly to display “LISA”.
L To stop the search, press {STOP}.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 2 or more times.
Note:
L To stop sending, see page 64.
6.3.2 Using the auto document feeder
1
Set the original (page 19).
2 If necessary, change to the desired resolution (page
36) and the desired contrast (page 36).