Filter
Top Products
9. Programmable Features
54
9.2 Basic features
Feature/Code Selection
Setting the date and time
{#}{1}{0}{1}
(KX-MB772 only)
Enter the date and time using the dial keypad. See page 21 for details.
Setting your logo
{#}{1}{0}{2}
(KX-MB772 only)
Enter your logo using the dial keypad. See page 22 for details.
Setting your fax number
{#}{1}{0}{3}
(KX-MB772 only)
Enter your fax number using the dial keypad. See page 22 for details.
Setting the location where
you use
{#}{1}{1}{4}
(KX-MB772 only)
This setting must match your location.
{1} “MIDDLE EAST” (default): To use in Middle East.
{2} “HONG KONG”: To use in Hong Kong.
{3} “MALAYSIA”: To use in Malaysia.
{4} “ASIA”: To use in Asia.
{5} “NEW ZEALAND”: To use in New Zealand.
{6} “AFRICA”: To use in Africa.
{7} “LAT.AMERICA”: To use in Latin America.
Setting the dialling mode
{#}{1}{2}{0}
(KX-MB772 only)
{1} “PULSE”
{2} “TONE” (default)
Note:
L This feature may not be available depending on feature #114 setting (page
3).
L See page 18 for details.
Setting recall/flash time
{#}{1}{2}{1}
(KX-MB772 only)
The recall/flash time depends on your telephone exchange or host PBX.
{0} “900ms”
{1} “700ms”
{2} “600ms”
{3} “400ms”
{4} “300ms”
{5} “250ms”
{6} “200ms”
{7} “160ms”
{8} “110ms”
{9} “100ms”
{*} “90ms”
{#} “80ms”
Note:
L The default may vary depending on feature #114 setting.
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
Changing the LCD display
contrast
{#}{1}{4}{5}
{1} “NORMAL” (default)
{2} “DARKER”