Panasonic KX-MB772CX Printer User Manual


 
6. Fax (KX-MB772 only)
44
Note:
L To stop receiving, see page 64.
L To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 59) beforehand. The
default setting is ON.
6.8.2 Activating TEL/FAX mode
Important:
L Not available when “NEW ZEALAND” is selected in
feature #114 on page 54.
1 Make sure feature #404 is set to TEL/FAX
beforehand (page 57).
2 Press {FAX AUTO ANSWER} repeatedly to display
TEL/FAX MODE.
L The {FAX AUTO ANSWER} light turns OFF.
3 The ringer volume setting should be ON (page 21).
How phone calls and faxes are received
1. INCOMING CALL will be displayed but the unit will
not ring.
2. The unit will wait for the duration of 2 rings before
answering the call.
L The number of rings is determined by the
“TEL/FAX delayed ring setting” (feature #212
on page 57).
L During this time, an extension telephone will ring.
3. The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
L The number of rings is determined by the “Silent
fax recognition ring setting” (feature #436 on
page 59).
L Callers will hear a ring back tone different from
the one generated by the telephone company.
L When you answer the call using an extension
telephone connected to the [EXT] jack, press
{STOP} on the unit to talk to the calling party.
B If you do not answer the call, the unit will activate
the fax function.
L Some fax machines do not generate fax calling
tones when sending faxes, therefore the unit will
try to receive a fax even if no fax calling tone is
detected.