Filter
Top Products
53
Troubleshooting
Cannot eject disk z Is the computer powered on?
Open lever works only when the computer is powered on.
To remove a disk when the computer is powered off, insert a pointed object
(e.g., the bent-out tip of a paper clip, or the tip of a pencil or ballpoint pen)
into the emergency hole, and then move it (Î page 44).
Cannot play back TV programs
recorded on a commercial DVD
recorder
z In the following cases, finalize the recording on the DVD recorder:
• If the program was recorded in DVD-R/RW in video mode
• If the program was recorded in DVD-RW in VR mode
Reinstalling B’s Recorder/B’s CLiP
When reinstalling, you will be asked
for a serial number
z Input the following serial number.
B’s Recorder:
B’s CLiP:
SD Card Setup (SD Memory Card security function)
Cannot log-on to Windows with the
SD memory card
z Windows log-on user name and password are not set in the SD memory
card correctly.
Enter the Windows user name and password without using the SD memory
card.
After logging on to Windows, set the same user name and the password on
the SD memory card and Windows, using one of the following operations:
• Change the setting for the SD memory card [SD Card Setup]
• Change the setting for Windows [Control Panel] (Î “Chapter 2: Security
Measures” in onscreen Reference Manual)
Fast User Switching Function
Some applications may not work
properly
z When switching to a different user with the Fast User Switching function,
the following problems may occur:
• Some applications may not work properly.
• Key combination with the
Fn
key may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
• The B’s CLiP icon will no longer be shown on the notification area and
CD-RW disk cannot be written.
In this case, log-off all users without using Fast User Switching function,
and try the operation once more. If the problem persists, restart the com-
puter.
Wireless LAN
Wireless LAN cannot be used
Access point is not detected
z When the wireless LAN function is turned off, turn it on using Intel
®
PROSet/Wireless Software. (Î page 40)
z Check that the access point is powered on.
z For detailed information, refer to “Chapter 7: Problems with Wireless LAN”
in onscreen Reference Manual.
Expanding Memory
You do not know the available RAM
module
Î page 72
Cannot tell whether the RAM module
has been correctly installed
z You can check whether the RAM module is recognized using the [Informa-
tion] menu in the Setup Utility. (Î page 33)
If the RAM module is not recognized, turn the computer off and reinsert.
The RAM module has not been rec-
ognized
z Make sure the RAM module has been properly inserted.
z Use the RAM module that supports the recommended specifications
(Î page 29).
Disk Operations