Filter
Top Products
Setup Utility
32
Getting Started
NOTE
z The [Advanced] menu cannot be changed when the Setup Utility is started up with the User Password.
NOTE
z When the Setup Utility is started up with the User Password, only a limited number of items can be displayed
and set. (Î page 29)
z [SD Startup], [SD Setting Method] and [Clear registered SD card] will be displayed only when an SD memory
card has been registered.
z When starting up the computer, if the message [Hard disk access is prohibited “Hard Disk Lock”] appears, start
up the Setup Utility, and reset the details to match the settings when [Hard Disk Lock] was set.
CD/DVD Drive Power
• You can set the drive power to [On] or [Off] when the computer is started up.
• When set to [Off]:
• From the next time you start the computer, you will be unable to start up from
DVD-ROM & CD-R/RW drive. The disk cover cannot be opened until Win-
dows has started. To start up from the DVD-ROM & CD-R/RW drive (give
preference to [USB CDD] (internal DVD-ROM & CD-R/RW drive) in the
[Boot] menu), set this to [On].
• If operations are resumed from hibernation mode while a disk is set, it may
take about 20 seconds for operations to resume.
• The drive power cannot be turned on/off with the drive power/open switch until Windows
starts, regardless of the current on/off status.
Off
On
Battery Charging Indicator
• Set the battery indicator to turn on or flash while the battery pack is recharging.
On Continuous
Flashing
(An u
nderline indicates the factory default settings)
Advanced Menu
(An underline indicates the factory default settings)
Modem
• Select whether to use the internal modem function ([Enable]) or not ([Disable]).
(This does not work for the external modem.)
Disable
Enable
LAN
• Select whether to use the internal LAN function ([Enable]) or not ([Disable]).
(This does not work for the external LAN card.)
Disable
Enable
Wireless LAN
• Select whether to use the internal wireless LAN function ([Enable]) or not ([Disable]).
(This does not work for the external wireless LAN card.)
Disable
Enable
Legacy USB Support
• Select whether to use the function that makes the computer recognize internal DVD-ROM
& CD-R/RW drive, USB keyboard and USB floppy disk ([Enable]) or not ([Disable]) before
starting Windows.
Disable
Enable
Security Menu
(An underline indicates the factory default settings)
Execute-Disable Bit Capability
• When [Execute-Disable Bit Capability] is set to [Enable], it means that this computer sup-
ports hardware-based Data Execution Prevention (DEP). It should usually be set to
[Enable]. DEP is a set of hardware and software technologies that perform additional
checks on memory to help prevent malicious code from running on a system.
Disable
Enable